Securing The Camera in the Waterproof Case
The camera must be secured in the waterproof case before recording underwater.
Perform the following procedure to secure the camera properly
.
1
.
Open the waterproof case
Squeeze the recessed buttons on each side
of the cover latch.
*
Release the catch
* Open the case
2
.
Insert the camera
*
Ensure the camera is off.
*
Gently insert the camera into the case.
1
3
3
.
Close the waterproof case
*
Fasten the catch
* Close the case securely, make sure that the
waterproof seal and its
contact surfaces are free of debris (e.g. hair, sand or dirt). Even a single
strand of hair or a tiny grain of sand caught in the seal can cause leaks.
*
Insert a new silica gel dry pack into the case to
absorb any moisture that might accumulate.