10
4.
Reboot: Click the Reboot button to restart the matrix.
5.
Enable Beep: Click the Enable Beep checkbox to enable or disable audio feedback
from the matrix.
6.
Power On: Click the Power On checkbox to turn the matrix on or off.
7.
Status: Click the Status button to refresh the matrix status.
8.
Clear: Click the Clear button to clear all device information.
9.
Device Information: Information about the device is displayed in this section.
EDID Page
Rather than using the general physical EDID settings, you can individually set the EDID for
each input. This can be done in three ways: manually selecting the EDID mode, copying the
EDID data from a particular display, or reading all EDID information from a file. Note that to
use this program, the EDID DIP switches must be set to 1111.
1.
Set EDID Mode: Use the first drop-down list to select the EDID capabilities, then use
the second drop-down list the select the video source device, and finally click the
Set button to assign the EDID capabilities.