7
MULTIFUNCTION BUTTON
The Multifunction Buttons on the Transmitter and Receiver perform the following
functions, depending on the adapter's status and the way that the button is pressed.
Wakeup Function: If the adapter is in Sleep mode, a momentary press of the
Multifunction Button will wake the adapter and start normal operation.
Factory Default Function: Press and hold the Multifunction Button for ten
seconds to reset the adapter to the factory default settings.
Next Network Function: If the Transmitter is awake and the Multifunction
Button is pressed momentarily, the Transmitter will release its currently
associated network and will join the next available network. If there is only one
Receiver in the room, the Transmitter will eventually reestablish the original
connection. A maximum of 10 Receivers can be supported in the same room.
Next Source Function: If the Receiver is awake and the Multifunction Button is
pressed momentarily, the Receiver will release its current video connection and
will connect with the next available source. If there are no other Transmitters
available, the connection will not be interrupted. A maximum of 16 Transmitters
can be supported in the network.
INSTALLATION
Perform the following steps to install and operate the Blackbird™ Wireless HDMI®
Extender.
1.
Ensure that all devices that will be connected are powered off and unplugged
from their power sources.
2.
Place or mount the Transmitter and Receiver in their intended locations.
3.
Using a High Speed HDMI Cable (not included), plug one end into one of the
HDMI inputs on your television or display, then plug the other end into the HDMI
OUT port on the Receiver.
4.
Using a High Speed HDMI® Cable (not included), plug one end into the HDMI IN
port on the Transmitter, then plug the other end into the HDMI output of your
HDMI source device (DVD player, etc.).
