15
Controlling a Source Device from All Receivers
Perform the following steps to control the source device from all three receiver locations.
1.
Plug one of the included IR Transmitters into the IR OUT jack on the matrix that
corresponds to the source device to be controlled, then position it where it can
transmit to the IR eye on the source device.
2.
Plug one of the included IR Receivers into the IR In jack on one of the receivers, then
position it where it can receive signals from the source device's IR remote control.
Repeat for the other two receivers.
CONTROL
Front Panel Buttons
•
Repeatedly press one of the OUTPUT buttons to cycle through the various inputs for
the chosen output. The LED corresponding to the selected input illuminates blue.
•
Press and hold one of the three PRESET RECALL buttons to save the current
input/output layout to the selected PRESET. The LED next to the button illuminates
blue to indicate that it is selected.
•
Momentarily press one of the three PRESET RECALL buttons to recall a previously
saved PRESET. The LED next to the button illuminates blue.
