11
7.
Set the Subnet Mask to 255.255.255.0.
8.
Click the OK button to close the Internet Protocol Version 4
(TCP/IPv4) window.
9.
Click the OK button to close the Local Area Connection
Properties window.
10.
To access the Web UI interface, type 192.168.1.202 into your
internet browser.
Network Connection
Perform the following steps to connect using an existing Ethernet
network.
1.
Plug one end of an Ethernet cable (not included) into the
Ethernet port on the rear panel, then plug the other end into
your network router or an Ethernet hub.
2.
To access the Web UI interface, type 192.168.1.202 into your
internet browser.
3.
On the Sys Settings Screen, set the Network Type to DHCP.
Refer to the following section for details.