10
WEB UI CONTROL
You can control the KVM switch using a computer connected through
the Ethernet port on the rear panel. You can connect directly or through
an existing Ethernet network.
Direct Connection
Perform the following steps to connect your computer directly to the
KVM switch. These instructions assume the use of the Windows®
operating system.
1.
Plug one end of an Ethernet cable (not included) into the
Ethernet port on the rear panel of the KVM switch, then plug
the other end into the Ethernet port on your computer.
2.
On your computer, click Start > Control Panel > Network and
Sharing Center.
3.
Click the Change adapter settings option.
4.
Right click Local Area Connection, then select the Properties
option.
5.
Highlight Internet Protocol
Version 4 (TCP/IPv4), then
click the Properties button.
6.
Select Use the following IP
Address for static IP
address. Set the IP Address
to any address between
192.168.1.1 to 192.168.1.255,
except 192.168.1.202.