background image

11 

TECHNICAL SUPPORT 

Monoprice is pleased to provide free, live, online technical support to assist you with any 
questions you may have about installation, setup, troubleshooting, or product 
recommendations. If you ever need assistance with your new product, please come online 
to talk to one of our friendly and knowledgeable Tech Support Associates. Technical 
support is available through the online chat button on our website www.monoprice.com 
or through email by sending a message to [email protected]. Check the website for 
support times and links. 
 

REGULATORY COMPLIANCE 

Notice for FCC 

 

This device complies with Part 15 of the FCC rules. Operation is subject to the following 
two conditions: (1) this device may not cause harmful interference, and (2) this device must 
accept any interference received, including interference that may cause undesired 
operation.  
Modifying the equipment without Monoprice's authorization may result in the equipment 
no longer complying with FCC requirements for Class B digital devices. In that event, your 
right to use the equipment may be limited by FCC regulations, and you may be required to 
correct any interference to radio or television communications at your own expense. 
This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses and can radiate radio frequency energy and, if not installed and 
used in accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the 

Summary of Contents for 625893













Reviews: