background image

 

Off Value: This specifies the value of the message that is transmitted when the 
Trigger Pad turns off. The range of values is 0 ~ 127. You can set this only if the 
Assign Type is set to Control Change. 

 

Assignable Buttons 

These buttons transmit Control Change messages. You can choose whether the button will 
be enabled, the type of button operation, the control change number, and the values that 
will be transmitted when the button is pressed. These MIDI messages are transmitted on 
the Global MIDI Channel. 

 

Assign Type: This specifies the type of message that will be assigned to the button. 
You can disable the button (No Assign), or assign a Note message or a Control 
Change message. The possible values are No Assign, Note, and Control Change. 

 

Button Behavior: You can choose one of two types of behavior for the Button, 
Momentary or Toggle. If set to Momentary, the Note On or On Value will be 
transmitted when you press the Button and the Note Off or Off Value will be 
transmitted when it is released. If set to Toggle, the Note On or On Value will be 
transmitted the first time you press the Button and the Note Off or Off Value will be 
transmitted the next time you press it. 

 

Note Number: This specifies the number of the Note message that is transmitted. 
The range of values is C1 ~ G9. 

 

CC Number: This specifies the number of the Control Change message that is 
transmitted. The range of values is 0 ~ 127. 

 

On Value: This specifies the On Value of the Control Change message or Note 
message. The range of values is 0 ~ 127. 

 

Off Value: This specifies the Off Value of the Control Change message. You can set 
this only if the Assign Type is Control Change. The range of values is 0 ~ 127. 

 

 

Summary of Contents for 625893













Reviews: