This button determines whether the
GR1-2 or MAIN MIX signal is sent to
the CTRL ROOM output. Note that if
PFL is active, the signal sent to CTRL
ROOM is unaffected by the MAIN/
GR1-2 button.
24) CTRL/PHONES
This knob is used to adjust the signal
level of the CTRL ROOM and PHONES
outputs. The range of the knob is -
to +15dB.
This stereo, 12-segment LED display
indicates the overall level of the
output signal. Note that the
amplifier's output is at maximum
when the +10dB LED is illuminated.
26) DFX (AUX2)
This knob determines the internal
DSP module levels and the level of
the DFX output. The range of the
knob is -
to +15dB.
27) AUX SENDS (AUX1 SENDS)
This knob determines the level of the
master AUX SEND signal. The range of
the knob is -
to +15dB.
28) ST RETURNS TO AUX
This knob determines the level of the ST RETURN signals to their respective AUX SEND
outputs.
The range of the knob is -
to +15dB.
29) ST RETURNS TO MAIN
This control assign the ST RETURN signals to their respective MAIN MIX outputs. Which can
be varied from - to +15 dB.
23) MAIN/GR1-2
25) OUTPUT LEVEL
CLIP
AMP
18)
19)
20)
26)
25)
28)
31)
32
29)
34)
MUTE
PFL
PEAK
GR 1-2
MAIN
MIX
DFX
TO MAIN
TO AUX
AUX
SENDS
DFX
MAIN
G
1-2
R
OUTPUT LEVEL
10
4
0
7
10
20
30
L
R
7
2
4
2
48V
PWR
DIGITAL
EFFECTS
PROGRAM (PUSH)
FX TO
AUX
00 09 Echo
10 19 Echo Verb
20 29 Tremolo
30 39 Plate
40 49 Chorus
50 59 Vocal
60 69 Rotary
70 79 Small Room
80 89 Flange Verb
90 99 Large Hall
L R
15
0
15
0
15
0
15
0
15
0
15
10
dB
5
0
5
10
20
30
40
60
15
10
dB
5
0
5
10
20
30
40
60
15
10
dB
5
0
5
10
20
30
40
60
15
0
15
0
CTRL./PHONES
2TK IN/MP3
TO MAIN
TO CTRL.
ST RETURNS
88
21)
23)
22)
24)
27)
30)
33)
13) PFL
Each channel is equipped with a PFL button. When PFL is active, the audio signal
on the channel is sent directly to the CTRL and Headphones outputs and to the
output level meter, bypassing the fader. When PFL is off, the channel's output
level is affected by the fader.
This LED illuminates when the peak level of the post-EQ signal reaches 3dB below
clipping. For the XLR-equipped stereo input channels, both the post-EQ and post-
mic-amp signals are monitored and the LED illuminates if either of these signals
reaches 3dB below clipping.
15) GR1-2
Each channel is equipped with a GR1-2 button. Pressing this, pressing this
button
sends the signal to the GR1-2 mix bus.
16) L-R
Each channel is equipped
with an L-R button. Pressing this button sends the signal
to the MAIN MIX bus.
17) LEVEL
This
fader adjusts the overall level of this channel and sets the
amount of signal
sent to the main output.
18) MAIN MIX LEVEL
This fader is used to set the amount of signal sent
to the Main Mix output and
2TK OUT. The range of the fader is -
to +10dB.
19) GR1-2 LEVEL
This fader is used to set the amount of signal
sent to the GR1-2 bus. The range of
the fader is -
to +10dB.
20) DFX LEVEL
This fader is used to set the level of the signal sent from the internal Digital Effects
to the Main Mix. The range of the fader is -
to +10dB.
21) 2-TRACK SIGNAL PATH
This button determines whether the signal from the 2TK IN input is sent to the
CTRL ROOM or MAIN MIX output.
22) 2-TK IN/MP3
This knob is used to set the output level of the signal sent from the 2TK IN input to
the CTRL ROOM or MAIN MIX output. The range of the knob is -
to +15dB.
14) PEAK LED
8
9
Summary of Contents for 604570
Page 1: ...604570 1000 watt 12 Channel Powered Mixer with DSP...
Page 2: ...2...
