25
•
Ensure that the subwoofer is within range of the soundbar. Move it
closer to the soundbar.
•
The pairing between the soundbar and subwoofer may have been lost.
Perform the manual pairing procedure to pair the soundbar and
subwoofer.
The TV has display problems when viewing HDR content from an HDMI source.
•
Some 4K HDR TVs require the HDMI input or picture settings be
configured for HDR content. Refer to your TV's user's manual for
instructions on configuring this setting.
I cannot find the SB-300 entry in my Bluetooth® connections list.
•
Ensure that Bluetooth is enabled on your device.
•
Perform a scan for active Bluetooth devices to connect to.
•
Press and hold the
or BT button to put the soundbar into Bluetooth
pairing mode, then scan for active Bluetooth devices.
The system entered standby mode without pressing the button the soundbar
top panel or remote control.
•
This is normal operation. This system supports the ERPII requirement for
power saving and automatically goes into standby mode after 15
minutes of no detected input signal. If you were playing audio, increase
the output volume of your source device.
