22
2.
Open the Bluetooth settings on your mobile device and scan for nearby
Bluetooth devices.
3.
Locate the SB-300 entry. If you cannot find the SB-300 entry, press and
hold the
or BT button on the remote control for about 3 seconds, to
reinitiate Bluetooth pairing. The soundbar will say Pairing and the display
will show PAIR.
4.
Select the SB-300 entry from the list. If prompted for a passcode, enter
0000 (four zeros). Once the connection is made, the soundbar will say
Paired and the display will show BT.
5.
If your mobile device supports the AVRCP profile, press the
button
on the remote control to start or pause playback. Use the
and
buttons on the remote control to skip tracks. If your device does not
support AVRCP, you will need to control playback directly on your
device.
Notes:
•
If no Bluetooth device pairs with the soundbar within 2 minutes,
Bluetooth pairing mode will cancel and the soundbar will return to its
previous connection.
•
The effective Bluetooth range is about 19 feet (8 meters) in clear air. Any
obstructions between the soundbar and the mobile device can reduce
that range.
•
If a connected device is moved out of range, it will automatically
disconnect. To reconnect, simply move the device back to within range
of the soundbar.
•
If your device fails to reconnect, perform the Bluetooth® pairing process
again.
To disconnect your device from the soundbar, perform one of the following:
•
Switch to a different mode on the soundbar.
