21
3.
Plug one end of the included AC power cord into the AC~ jack on the
rear panel, then plug the other end into a nearby AC power socket.
POWER SAVING
•
After about 15 minutes of no detected audio or video signal, the
soundbar will automatically enter standby mode to save power.
•
If the soundbar is in standby mode, any detected audio or video signal
will cause the soundbar to turn on.
BLUETOOTH OPERATION
The soundbar features a Bluetooth® radio, which allows you to wirelessly stream
audio from a connected mobile device. Note that the connected device must
supported the Advanced Audio Distribution Profile (A2DP) to stream audio. If the
connected device supports the Audio Video Remote Control Profile (AVRCP),
you can use the soundbar's remote control to control playback.
Perform the following steps to pair your device with the soundbar:
1.
With the soundbar powered on, press the button on the soundbar
top panel or the BT button on the remote control to select Bluetooth®
mode. If not already paired with a device, the display will show NO BT,
indicating that the soundbar is not paired with any nearby device.
