4
14.
Install the volume control into the low-
voltage mounting bracket, taking care
to ensure that the wires do not come
loose from their connections or become
pinched or shorted.
15.
Repeat steps 4-14 for each additional
speaker pair, low-voltage mounting bracket, and volume control.
16.
Ensure that the amplifier is powered off and unplugged from the power source.
17.
At the amplifier, use a terminal block or wire nut to connect all the left-channel
negative (-) wires and a short length of speaker wire together.
18.
Connect the negative lead on the short length of speaker wire to the left-channel
negative (-) terminal on the amplifier.
19.
Repeat steps 17-18 for the left-channel positive (+) lead.
20.
Repeat steps 17-19 for the right-channel negative (-) and positive (+) leads. The
image below illustrates a proper connection for two volume controls.
