19
9.
With the printer powered off, insert the microSD™ card into the card slot.
AUTO CALIBRATION
Whenever the printer is sent to the Home position or whenever a print is started, the
printer will automatically calibrate the Printing Platform. This requires the Resin Vat to be
free of cured resin particles or print failures can occur.
ABOUT RESINS
Resin Storage
Resins should be kept in a dark and ventilated place. The storage location should be kept in
the +68 ~ +86°F (+20 ~ +30°C) temperature range. Lower temperatures can extend the
shelf life. The official shelf life is one year.
Resin Operation
Wear gloves when working with resin to prevent direct skin exposure. If resin does get on
your skin, wash the exposed area immediately with soap and warm water.
Cured resin is safe to handle without gloves. Printed models should not be used for food
applications.
Safety and Resin
There are many types of resins and resin manufacturers. This section contains general
safety guidelines for handling resin.
Wear gloves when working with uncured resin.
Wear safety glass/goggles when working with resin.
Do not eat or drink resin.
Refer to the Material Safety Data Sheet (MSDS).