15
Control Remote Device From Local
You can also control the remote display from the local end. For example, if you have HDMI®
input 3 connected to HDBaseT™ output 3, plug an IR receiver into the IR IN 3 jack on the
matrix, then plug an IR transmitter into the IR OUT jack on the receiver, as shown in the
diagram below.
Similarly, you can control all remote displays by plugging an IR receiver into the IR IN ALL
IN jack on the matrix. In this case, you must have an IR transmitter plugged into the IR OUT
jack on each connected HDBaseT™ receiver, as shown in the diagram below.
