18
6
4K@60Hz 4:2:0
PCM, Dolby®, DTS®
7
4K@60Hz 4:4:4
PCM, Dolby, DTS
To assign one of the predefined EDID settings to one source device, first press and hold the
EDID button for 3 seconds, then press an INPUT button, then use the LEFT (OUTPUT 2) and
RIGHT (OUTPUT 4) buttons to select one of the presets, and finally press the ENTER button
to confirm. For example, to assign one of the presets to HDMI® source 4, first press and
hold the EDID button for 3 seconds, then press INPUT 4, then use the LEFT (OUTPUT 2) and
RIGHT (OUTPUT 4) buttons to select a preset, and finally press the ENTER button. The EDID,
INPUT 4, LEFT, RIGHT, and ENTER buttons will blink 3 times.
To assign one of the predefined EDID settings to all source devices, first press and hold the
EDID button for 3 seconds, then press the ALL button, then use the LEFT (OUTPUT 2) and
RIGHT (OUTPUT 4) buttons to select a preset, and finally press the ENTER button to
confirm. The EDID, ALL, LEFT, RIGHT, and ENTER buttons will blink 3 times.
Inquiry Mode
Inquiry Mode allows you to check the connection status of the matrix as a whole or of a
single output. To enter Inquiry Mode, press and hold the ENTER button for 3 seconds.
To check the connection status, press and hold the ENTER button for 3 seconds, then use
the LEFT (OUTPUT 2) and RIGHT (OUTPUT 4) buttons to cycle through the five reports. The
following table shows examples of each of the five available reports.
#
LCD Screen
Description
1
Reports the connection status of all inputs. Y means
that there is a source connected to that input and N
means that there is not.
IN
LINK
1 2 3 4
Y Y N N
