6
PRODUCT OVERVIEW
Front Panel
1.
Power Switch: Turns the amplifier on and off.
2.
Power LED: Illuminates amber on initial power-up, then glows either green during
normal operation or red when in standby mode.
Rear Panel
3.
Line In: Stereo line-level analog RCA input jacks. When using bridged mode, the
mono input should be connected to the L input.
4.
Line Out: Stereo, buffered, loop line output of the original signal for connecting
additional amplifiers.
5.
Volume: Gain control to limit the maximum volume level.
6.
Output Selection: Switch to configure the type of output. When in the Bridged
position, the amplifier can be bridged for more power into a single 8-ohm load. The
8-ohm and 4-ohm positions optimize the stereo output for 8- or 4-ohm loads.
