7
Charging Station
Remote Control
1.
Clean Button (on/off): With the vacuum in
Standby mode, press the Clean button to start
or stop cleaning.
2.
Directional Buttons: While cleaning is in
progress, press the directional buttons to alter
the vacuum's path. The left and right buttons
will cause the vacuum to turn in those
directions, the forward button will cause the
vacuum to move forward and the back button
causes it to back up. The center button has no effect.
3.
Spot Cleaning Mode Button: Press the Spot button to cause the vacuum to
enter Spot cleaning mode in its current location. The vacuum will automatically
re-enter Normal cleaning mode when the Spot cleaning is finished. Alternatively,
use the directional buttons to re-enter Normal mode or stop cleaning by
pressing the Clean button.
4.
Home Button: Press the Home button to cause the vacuum to return to the
Charging Station to begin charging.
5.
Mode Button: Press the Mode button to cycle through the three cleaning
modes.
Note: Insert two AAA batteries (not included) into the remote control's battery
compartment prior to use. Remove the batteries if the remote will go unused for a long
period of time.