13
SCHEDULING
Setting the Clock
Prior to scheduling, the vacuum's clock should be set to the current time. Perform the
following steps to set the clock.
1.
Ensure that the vacuum is in Standby mode or is charging. If it is in Sleep mode,
press the Clean button on the vacuum to enter Standby mode. If the vacuum is
actively cleaning, press the Clean button on the remote control to stop cleaning
and enter Standby mode.
2.
Press the Clock button on the vacuum to enter Clock Setting mode. The clock's
hour display will start to flash.
3.
Press the Home button on the vacuum to increase the hour value or press the
Spot button on the vacuum to decrease it.
4.
Press the Clean button on the vacuum to confirm the hour setting. The clock's
minute display will start flashing.
5.
Press the Home button on the vacuum to increase the minute value or press the
Spot button on the vacuum to decrease it.
6.
Press the Clean button on the vacuum to confirm the minute setting.
7.
Press the Clock button on the vacuum to exit Clock Setting mode.
Setting the Scheduled Time
Perform the following steps to set the time at which the vacuum will begin automatic
cleaning.
1.
Ensure that the vacuum is in Standby mode or is charging. If it is in Sleep mode,
press the Clean button on the vacuum to enter Standby mode. If the vacuum is
actively cleaning, press the Clean button on the remote control to stop cleaning
and enter Standby mode.
2.
If the clock has not yet been set, set it by following the instructions in the
Setting the Clock section.
3.
Press and hold the Clock button on the vacuum for two seconds, then release
the button to enter Scheduling Mode. The LED display will show either the
