2
SAFETY WARNINGS AND GUIDELINES
This device is intended for indoor use only.
Do not expose this device to water or moisture of any kind. Do not place
drinks or other containers with moisture on or near the device. If moisture
does get in or on the device, immediately unplug it from the power outlet and
allow it to fully dry before reapplying power.
Use only in a well-ventilated area. Do not use in close, confined spaces.
The extrusion nozzle of this printer operates at high temperatures. Take care to
avoid touching the nozzle and any newly extruded material. Take care to not
touch the nozzle to flammable materials.
Always allow the nozzle and extruded material to cool before touching.
Some types of filament can emit a strong odor when heated. Always use this
printer in a well-ventilated area.
Do not use the printer near a heat source, such as a fireplace, heating vent,
radiator, etc. Do not leave it in direct sunlight.
This printer is suitable for use by children as young as 8 years old. Children
should always be closely supervised by a responsible adult when using this
printer.
INTRODUCTION
Thank you for purchasing this 3D Printing Pen! This pen printer allows you to create
3D models or repair 3D models by hand. It has low-temperature and high-temperature
print settings, for use with eMate and PLA filaments. It supports temperatures from
80 ~ 195°C and has eight print speed settings. It is suitable for use by children as
young as 8 years old, though they should always be closely supervised by an adult.
Summary of Contents for 16275
Page 1: ......
