7
6.
Using a 3.5mm TRS stereo audio cable, plug one end into the audio input on your
display or powered speakers, then plug the other end into the AUDIO OUTPUT
connector in the VGA section on the converter.
7.
Using a three conductor RCA audio/video cable, plug one end into the RCA
composite video and stereo audio inputs on your display, then plug the other end
into the RCA CVBS, L, and R OUTPUT connectors on the converter. Match the colors
on the cable connectors with the insert colors on the RCA connectors on both the
converter and the display. Note that some cables and devices use a black
connector/insert in place of white for the Left channel audio.
8.
Using an SDI (BNC) video cable, plug one end into the SDI input on your SDI display,
then plug the other end into the SDI LOOP OUT connector on the converter.
9.
Using an SDI (BNC) video cable, plug one end into the SDI IN connector on the
converter, then plug the other end into the SDI output on your SDI video source.
10.
Plug the DC barrel connector on the included AC power adapter into the DC 12V
input on the converter, then plug the AC power adapter into a nearby power outlet.
11.
Depress the ON side of the power switch on the converter to power it on.
12.
Plug in and power on all connected equipment.
Congratulations, your video converter is now installed and ready for use!
TROUBLESHOOTING
Q1: I get no video on any output.
A1: Ensure that the converter is plugged in and powered on. Check the cable connections
for the cable from the SDI video source to the converter. Try swapping the cable with
a known good one. Ensure the cable length does not exceed the maximum length for
the video resolution in use. Ensure that the video source resolution does not exceed
1920x1080p. Try using an SD video source. Ensure that the BLACK option is not
selected.
