9
9.
Attach the Base Supports (D) to the Lifting Columns (E and F) using the included
Allen Key (S-D) and 8x Screws (S-A), as shown in the image below and to the left.
10.
With the help of your assistant, flip the desk assembly over so that it rests on the
Base Supports (B), as shown in the image above and to the right.
11.
Connect one end of one of the
Extension Cords (I) into the lead on one
of the Lifting Columns (E or F), then
plug the other end into the Control
Unit (B). Repeat using the second
Extension Cord (I) and the other Lifting
Column (E or F).
12.
Plug the Control Panel (G) into the side
of the Control Unit (B).
13.
Plug the Power Cord (H) into the
Control Unit (B), then plug the other
end into a nearby AC power outlet.
Summary of Contents for 15722
Page 1: ......
