Monoprice 15722, User Manual

Page: 12 / 15

12
OPERATION
Movement

Press and hold the
△
or
▽
button until the desktop reaches the desired height.
Memory

The system can remember three different desktop height settings.

To store a position, press the M button. The Display will show S-.

Within 5 seconds, press either the 1, 2, or 3 buttons to store the setting.
 Press the 1, 2, or 3 buttons to recall the stored height setting.
 After recalling a stored height setting, the desktop will automatically move to the
saved height. Press any button other than the T button to stop the automatic
movement.
Timed Reminder

The system has a timer, which you can use to remind yourself of the need to change
your working position.

The timer can be set from 0.5 ~ 2.0 hours, in 0.5 hour increments.

To set the timer, press the T button. The display will flash 0.5h. Then press the T
button repeatedly to increment the time on the display to the desired length of
time.

Once the desired length of time is displayed, wait for the display to stop flashing
and the LED in the upper right corner to illuminate, indicating that the timer has
been successfully set.

When time is up, the system will beep to remind you that it is time to change your
working position. The timer will then be automatically cancelled.

To cancel a timed reminder, press the T button 5 times until the current height is
shown on the Display and the LED in the upper right corner turns off.