10
14.
Remove the protective film from the Rubber Pads (S-F), then stick them to the
Telescopic Frame (A).
15.
With the help of your assistant, place
your desktop on the Telescopic Frame
(A) and Upper Supports (C). Ensure that
the desktop is straight and evenly
supported.
16.
Using 8x Screws (S-B) and your
powered screwdriver with #2 Phillips bit (not included), attach the desktop to the
Upper Supports (C).
17.
Each of the individual feet can be
adjusted up or down to fine tune the
level. Use a carpenter's level (not
included) to ensure that the desktop is
level on both its length and width and
adjust the feet accordingly.
Summary of Contents for 15722
Page 1: ......