background image

cloth. For best results, use a microfiber cleaning cloth. For particularly stubborn 
deposits, moisten the cloth with warm water. 

 

Do not use excessive volume when listening to this speaker. If you experience pain, 
discomfort, or dizziness, reduce volume immediately. Prolonged exposure to 
excessive volume can cause permanent hearing damage. 

 

Do not disassemble or attempt to service this subwoofer. 

 

INTRODUCTION 

Congratulations on your purchase of this Home Theater Subwoofer from Monoprice! When 
setup and used properly, this speaker will give you years of superior sound reproduction. 
For best results, please read this entire manual prior to installation and use. To avoid 
personal injury or damage to your valuable equipment you should pay extra attention to 
the safety warnings and guidelines. Keep this manual in a safe place for future reference. 
 

CUSTOMER SUPPORT 

The Monoprice Customer Service department is dedicated to ensuring that your ordering, 
purchasing, and delivery experience is second to none. If you have any problem with your 
order, please give us an opportunity to make it right. You can contact a Monoprice 
Customer Service representative through the Live Chat link on our website 
www.monoprice.com during normal business hours (Mon-Fri: 5am-7pm PT, Sat-Sun: 9am-
6pm PT) or via email at [email protected] 
 

 

Summary of Contents for 14567



















Reviews: