48
Dry run on/off When enabled, Gcode execution will continue after a syntax error is
encountered.
Configuration
Back Returns to the Main Menu.
General >> Opens the general configuration options menu.
Acceleration >> Opens the acceleration configuration options menu.
Feedrate >> Opens the feedrate configuration options menu.
Extruder >> Opens the extruder configuration options menu.
Store to EEPROM Saves the current settings to the built-in EEPROM memory.
Load f. EEPROM Allows you to load settings from those previously saved to the built-in
EEPROM memory.
Configuration >> General
Back Returns to the Configuration Menu.
Baudrate Allows you to set the serial communications speed. This can be set to 9600,
14400, 19200, 28800, 38400, 56000, 57600, 76800, 111112, 115200, 128000, 230400,
250000, 256000, 460800, 500000, 921600, 1000000, or 1500000.
Stepper Inactive >> Dis. After XXX [s] Disables the stepper motors after the specified
inactive time. The possible values are 0 - 10080 in 60 sec increments.
Max. Inactive >> Dis. After XXX [s] Disables the extruder after the specified inactive
time. The possible values are 0 - 10080 in 60 sec increments.
