49-80329 Rev. 5
23
14 INSTALL DUCT COVER TRIM
■ Install side brackets to secure the lower duct tightly
against the upper duct.
■ Hold lower trim strips (narrow pieces) with hooks
facing down. Place the hooks inside the slots and
slide downward.
■ Select the correct size upper trim strips and press
into place.
Installation Instructions
INSTALLATION—RECIRCULATING
Upper
trim
strip
Lower
trim strip
Lower
trim
strip
Upper
trim
strip
Side
bracket
15
INSTALL FILTERS
IMPORTANT:
Check to be sure that the main ON/
OFF switch next to the motor is in the ON position.
Charcoal filter
■ Install the black charcoal filter into the center
opening. Secure the filter with thumbscrews on
each side.
Metal filter
■ Tip the filter into the left or right side of the
opening. Lift the filter to the opposite side and
into the filter lock.
■ To remove the filter, pull the filter lock downward.
16
FINALIZE INSTALLATION
■ Remove all tape and packing material.
■ Refer to the Owner’s Manual for operating
instructions.
Filter lock
1” = 2.5 cm; 1’ = 0.3 m
