These instructions are divided into 2 options:
Option 1—For non-dispenser and dispenser models
using custom collar trim.
Option 2—For dispenser model using the standard
full-width trim.
Parts List:
A. Fresh food door
extrusion
B. Freezer door
extrusion for non-
dispenser model and
dispenser model
using custom collar.
(Option 1)
C. Freezer door
extrusion for
dispenser model
using full-width trim.
(Option 2)
D. Handle bracket for
dispenser model using
full-width trim.
(Option 2)
This kit provides for the installation of custom handles
on 1/4" thick decorator door panels. The door extrusions
and bracket allow custom handles to be secured to the
door structure, rather than the door panels. This kit
contains all the necessary parts for dispenser and non-
dispenser models. Follow the instructions for Option 1
when applying custom handles to a non-dispenser
model or dispenser model using custom collar trim.
Follow instructions in Option 2 for a dispenser model
using the standard full-width dispenser trim.
• Carefully remove the Phillips head screws from the
door handle endcaps, top and bottom.
• Open doors to 90
°
. Remove the screws from the
full-length aluminum handles of both doors.
• Retain screws, discard handles and endcaps.
Tools and materials
required:
• #2 Phillips screwdriver
• Drill and appropriate bits
• Custom door panels
• Custom handles
• Safety glasses
ZKH1 Trim Kit
Custom Handles with 1/4" Panels
Note:
If a custom collar is to
be used, order ZWCD1 Trim Kit.
20
OPTION 1
For non-dispenser
model or dispenser
model using custom
collar trim
Step 1
Remove
handles
Kit
contents
ZKH1 INSTALLATION
INSTRUCTIONS
