– 22 –
Note:
Excluding the X-High Output burner the
following describes the procedure to remove
a single burner. The procedure to remove the
remaining burners is identical.
To remove the burner:
Remove the maintop. (See
Maintop
.)
Remove the top heat barrier by lifting it out of
the burner box.
Remove the
9
/
16
-in. nut and separate the Hi-Lo
gas tube from the burner.
Remove the
7
/
16
-in. nut and separate the Simmer
gas tube from the burner.
Remove the two ¼-in. hex-head screws that
attach the burner to the burner box.
1.
2.
3.
4.
5.
Spark Module
To remove the spark module:
Remove the regulator.
Remove the maintop. (See
Maintop
.)
Remove the top heat barrier by lifting it out of
the burner box.
Remove the two ¼-in. hex-head screws and the
module cover.
1.
2.
3.
4.
Disconnect the wire harness from the spark
module.
Mark and disconnect the ignitor wires from the
spark module.
Remove the two ¼-in. hex-head screws that
attach the spark module to the burner box.
5.
6.
7.
Ignitor Wires
Spark Module
Wire Harness
Burner
Hi-Lo Gas Tube
Simmer Gas Tube
Gray
Brown
Orange
Yellow
Blue