8
31-11026
Installation Preparation
OUTDOOR GRILL, COOKTOP AND ACCESSORY CUTOUT DIMENSIONS
12” Min. Separation
Between Cutouts
• If the countertop has an overhang, it must be notched or
cut back flush with the front face of the cabinet below. This
will allow the grill or side burner to fit flush at the front.
Countertop Notch Detail
5/8” for Grills
9/16” for Outdoor Cooktop
Depth to
Cabinet Face
• The grill drops into the opening and hangs from the side
flanges. A deck is not required for support on the bottom.
• The construction must be level and stable and capable
of supporting up to 400 lbs.
• The opening for the cooktop must be 24-1/2” deep from
the front of the countertop. Cut a 1” dia. hole below the
cooktop for the drain hose.
• Cut a 1” dia. hole at the back left side of the cutout
for the grill’s electrical connection.
• A 120 volt outlet must be located within reach of the grill’s
6’ power cord. The transformer bracket must be mounted
within 3-1/2 feet of the outdoor grill.
• Maintain 12” separation between cutouts for an outdoor
grill and an outdoor cooktop installation.
Rotisserie
Connection
24-1/8”
1-1/8”
Min.
24-1/2”
Access Doors
ZX27AD
18-1/4”
Grill Cutout
10-7/8”
Gas and Electrical Locations
28-3/4” for 30” Models
40-3/4” for 42” Models
52-3/4” for 54” Models
GAS LOCATION:
Cut a 3-1/2” dia.
hole for the manifold
connection as
shown for LP tank or
stationary gas line
connections.
ELECTRICAL
LOCATION:
Cut a 1” dia. hole at
the back left side of
the cutout.
Gas and Electrical Locations
36”
Min.
3-1/2”
2”
3-1/2”
7-3/8”
10” Min.
3-1/2” Dia. Hole
for Stationary
Gas Line
3-1/2” Dia. Hole
for LP Tank Hose
The grill rotisserie connection is on the left side near
the front. Installation into a 24-1/2” front-to-back
opening allows access to the rotisserie outlet.
*See Note.
*
Note: When installing more than one accessory below the countertop, align the accessories
across the bottom by adjusting the dimension above the floor. The cutouts must be offset
depending on the product overlap below the cutout. Overlap for ZX27AD is 7/8”.
Note: When installing into combustible material, Built-In Monogram Outdoor Grills
require the use of a grill liner. Refer to Grill Liner Installations Instructions for installation
requirements.
Non-Combustible
Non-Combustible
24-1/2”
Summary of Contents for ZGG300LB
Page 47: ...31 11026 47...
