2
31-7000078 Rev. 3
Safety Information
CONTENTS
Design Information
Models Available ............................................... 2
Product Dimensions and Clearances ................ 3
Tools and Parts Required ................................. 3
Installation Preparation
Electrical Requirements .................................... 4
Grounding Instructions ...................................... 4
Preparing the Opening (Standard) .................... 5
Preparing the Opening (Flush Mount) ............... 9
Installation Instructions
Step 1, Remove Packaging and Parts ............ 11
Step 2, Slide Oven Into Cutout ....................... 12
Step 3, Install Bottom Trim .............................. 12
Step 4, Install Mounting Screws ...................... 12
Step 5, Finalize Installation ............................. 12
MODELS AVAILABLE
ZSB9121NSS – STAINLESS STEEL
BEFORE YOU BEGIN
Read these instructions completely and
carefully.
IMPORTANT
—
Save these instructions
for local inspector’s use.
IMPORTANT
—
Observe all governing codes
and ordinances.
•
Note to Installer
—
Be sure to leave these
instructions with the Consumer.
•
Note to Consumer
—
Keep these instructions
with your Owner’s Manual for future reference.
•
Skill Level
—
Installation of this appliance
requires basic mechanical and electrical skills.
•
Completion Time
—
1 Hour.
•
Proper installation is the responsibility
of the installer. Product failure due to improper
installation is not covered under the warranty.
See Owner’s Manual for warranty information.
IMPORTANT
—
Use this oven only for its
intended purpose. Never use the oven for
warming or heating a room. Prolonged use
of the oven without proper ventilation can be
hazardous.
For personal safety, remove
house fuse or oven circuit
breaker before beginning installation to avoid
severe or fatal shock injury.
For personal safety, the
mounting surface must
be capable of supporting the cabinet load, in
addition to the added weight of the oven and
drawer, plus additional oven loads.
CAUTION
CAUTION
Summary of Contents for Advantium ZSB9121N1SS
Page 13: ...31 7000078 Rev 3 13 Notes ...
Page 14: ...14 31 7000078 Rev 3 31 7000078 Rev 3 12 21 GEA Printed in China ...
Page 15: ...INSTRUCCIONES DE INSTALACIÓN Horno Advantium 120V 27 ESPAÑOL MONOGRAM COM MFL59060935 ...
Page 28: ...14 31 7000078 Rev 3 31 7000078 Rev 3 12 21 GEA Impreso en China ...
