16
STEP 9A INSTALL OVERLAY PANELS
• There are two sets of holes in the handle side trim.
Replace handle side trim by installing the original screws
in the REAR screw holes.
6HFXUHWKHKDQGOHWRWKHGRRUXVLQJWKH)5217
screw holes.
)ROORZWKHVDPHSURFHGXUHVWRLQVWDOOWKHGUDZHUSDQHO
Custom handles
If you are using custom handles, the handle must be
properly secured to the panel before sliding the panel
into the trim.
• The cabinet manufacturer will supply the custom
handle and hardware.
6HFXUHWKHGRRUGUDZHUWULPXVLQJERWKWKH)5217
and REAR screw holes. Discard supplied handle.
Right hand models shown. Use the same instructions
for left hand models.
Install door and drawer panels:
• Open door to 90°. Remove the 4 Phillips head screws
from the door handle.
• Remove handle. Retain all screws.
• Remove 4 screws holding trim, lift off trim.
Retain screws.
• Slide overlay panel into the door trim.
Supplied handle shown in the
overlay panel position.
Use Rear Holes
to Secure Trim
Use Front Hol
to Secure Hand
Installation Instructions
Summary of Contents for 224D3735P001
Page 19: ...19 Notes ...