15
STEP 9 INSTALL 1/4
”
FRAMED PANELS
• There are two sets of holes in the handle side trim.
Replace handle side trim by installing the original screws
LQWKH)5217VFUHZKROHV
• Secure the handle to the door using the REAR screw
holes.
)ROORZWKHVDPHSURFHGXUHVWRLQVWDOOWKHGUDZHUSDQHO
Right hand models shown. Use the same instructions
for left hand models.
IF YOU ARE INSTALLING OVERLAY PANELS,
GO TO STEP 9A.
Install door and drawer panels:
• Open door to 90°. Remove the 4 Phillips head screws
from the door handle.
• Remove handle. Retain all screws.
• Remove 4 screws holding trim, lift off trim.
Retain screws.
• Slide framed panel into the door trim.
Standard supplied handle shown
in 1/4
”
panel position.
Installation Instructions
Summary of Contents for 224D3735P001
Page 19: ...19 Notes ...