monofil 4451, Operating Instructions Manual, Page: 14 / 31

- 14 -
07 OPERATION
Operation means the entirety of all activities executed on the machine and on similar working equipment from the
takeover of the machine until it’s decommissioning.
This chapter informs you about:
- Safe operation
- Exploiting the full potential of the machine
- Economic operation of the machine
7.1 Safety Notes
- See also chapter 2 General Safety Notes
- See also chapter 3 Special Safety Notes
- Check safety devices daily before switching on!
- When carrying out set-up and adjustment works in manual mode, act appropriately to secure the system
against unauthorised operation.
- If necessary, work should only be carried out by two persons.
- If the machine is not in filling mode, or if the responsible personnel is leaving the working area, the machine
must “
always
” be disconnected from the pneumatic air supply and secured against unauthorised restarting.
7.2 Operating the filling machine
7.2.1 Setup, adjust, equip
- Close the protection door
- Connect the device to the compressed air supply
7.2.2 Check before switching on
- Check the piston for tight fit
- Check the piston for wear (e.g. scoring)
7.2.3 Preparation
- Remove the safety cap from the aerosol can.
- Remove the spray head.