Commands
Choose the bullet for
Commands
located just under the Settings title to access the
commands page.
A.
Selecting the
Reform Network
command will trigger the gateway to remove all
sensors from the internal whitelist, and then request a new sensor list from the server.
This command will force all sensors to reinitialize their connection with the gateway.
Reforming the network cleans up communication when multiple networks are in
range of each other so they are all in sync. This is especially useful if you must move
sensors to a new network, and would like to clear these sensors from the gateway’s
internal list. Reforming the network will place a new list of sensors that will continue to
exchange data.
B.
If there are updates available for your gateway firmware, the
Update Gateway
Firmware
button will appear, giving you the option to select it and install the latest
firmware.
C.
Choosing the
Reset Gateway to Factory Defaults
button will erase all your unique
settings and return the gateway to factory default settings.
PAGE 7
