ServoFlex Type 328.XX
Setup
2013-09-12
27
Mönninghoff
6
Setup
6.1
Safety
Assembly and initial startup may only be carried out by specifically-
trained specialist staff.
Wear the following protective equipment during all work on assem-
bly and initial startup:
Close-fitting protective clothing with a low tear
strength and no protruding parts. These clothes
are principally designed to protect against being
caught by moving machine parts.
Goggles to protect the eyes from flying parts and
liquids.
Safety footwear with protective caps and oil-
resistant soles.
CAUTION!
Risk of injury due to improper assembly and
initial startup!
Improper assembly and initial startup can lead to
personal injury or material damage.
► Before beginning work, make sure that sufficient
assembly workspace is available.
► Be careful when handling exposed, sharp-edged
components.
► Pay attention to tidiness and cleanliness at the
workplace! Components and tools lying around
or on top of each other can be sources of acci-
dents.
► Assembly components must be properly in-
stalled. Adhere to the specified screw torques.
► Do not grease or oil screws and nuts.
Staff
Personal protective equipment
Improper assembly and initial
startup
