ServoFlex Type 328.XX
Setup
2013-09-12
35
Mönninghoff
Aligning the clutch with dial gauge
To align the clutch with the help of a dial gauge, a clutch side
must be turned.
NOTE
To optimise mounting, turn the screws and not the
nuts when screwing the diaphragm assembly set.
Aligning a double cardan clutch
To align a double cardan clutch, proceed as follows:
Determine dimension "S" (angular displacement), make sure
that the diaphragm assemblies are tension free axial and adjust
if necessary.
radial displacement
angular displacement
axial displacement
