Monitor Audio PLW215 II, Initial Setup Manual

Page: 10 / 134

Control Connections/
Interfaces 12v Trigger in (3.5mm mono mini-jack, 6v threshold), assignable to On/Off or Preset change
3.5mm Microphone input jack (mic supplied)
RJ45 connector supporting RS232 (EIA/TIA - 561, Tx Pin 6, Rx Pin 5, Gnd Pin 4)
IR repeater – Output (3.5mm mono mini-jack)
USB – Type B, for connecting to SubConnect PC application and Firmware update
Electrical Certifications CE / CB/ ETL / Fcc / ErP (Energy saving compliant)
Mains Input Voltage 100 - 120 Vac / 220 - 240 Vac 50/60Hz (Manually selected)
Power Consumption Maximum 1200W, Standby <0.5W (ErP compliance)
Fuse Type 20mm T12.5AL 250VAC
Weight (unpacked) 57.54Kg (126lb 10oz)
Dimensions
(inc amp, drivers and feet).
(H x W x D) 546.3 x 504 x 512mm
21
1/2
x 19
13/16
x 20
3/16
Inches
Finished Available Santos Rosewood veneer with piano lacquer, Ebony veneer with clear piano lacquer or Piano Black
lacquer
SubConnectSpecifications
SubConnect Windows (7 onwards, 32/64bit) compatible setup application available from the
Monitor Audio website and the electronic manual
Allows the user to control advanced sub woofer setup features.
Settings can be saved while not connected to the sub woofer for off sight setup.
Global Settings Display Brightness (0-100%), Dim (to 50% or to Off), Default Preset, Mute Link Outputs,
12V Trigger Assignment (Power on/off or Preset select), Input gain (Master -80 to +20dB, Trim -6 to +6dB,
Mute), Phase (0-360 in 15 degree steps), Night Mode Threshold (-2dB to -20dB), Auto On / OFF (Enable
Signal Sense, Always On, Time to off 5-240mins)
User Presets 4 fully configurable user Presets including,
Preset Name, LPF Frequency (5Hz Steps from 20-135Hz), LPF Slope Order (-12 or -24dB/Oct), Input
(Stereo, LFE or Both), Trim Offset (-6 to +6dB), EQ mode (Impact, Music, Movie or Default), User EQ (6
adjustable filters applied on top of EQ mode), Room EQ (On/OFF), Night Mode (On/OFF)
User Equalisation 6 fully controllable EQ filters and 6 default filters with gain offset per preset.
Default settings: Flat / Music / Movie / Impact
Night Mode Night mode, assignable (on or off) per Preset with global threshold (-2dB to -20dB).
Introduces dynamic range reduction lowering the level of loud sections.
8 PLW215 II