Monicon GTR-620, User Manual, Page: 10 / 27

[10]
Default
：
0
Description
：
Duration of engine idle
2. Engine Settings
1. PreAdd Fuel Time
Setting
：
0.0~5.0(seconds)
Default
：
3
Description
：
Activates fuel pump before initiating crank procedure.
2. Pre-Heat Time
Setting
：
0~20(Seconds)
Default
：
0
Description
：
Duration of Preheat before crank.
3. Energied to Stop
Setting
：
1~30(seconds)
Default
：
10
Description
：
Output duration for stop solenoid to shut down the engine.
4. Failed to stop
Setting
：
1~10(Seconds)
Default
：
2
Description
：
Time delay before triggering engine shutdown failed alarm.
5.
Trip then shut
Setting
：
Disable/ Enable
Default
：
Enable
Description
：
When error occurred, timer starts before shutdown the engine
6.
Trip duration
Setting
：
30~900(Seconds)
Default
：
30
Description
：
When error occurred, controller outputs error signal, if error is not cleared
within setting, system initiates Genset shutdown.
7. Cooling time
Setting
：
0~1250(Seconds)
Default
：
30
Description
：
Set engine cooling time for normal Genset shutdown. Engine cooling time is
disabled during malfunction shutdown
8. Freq versus RPM
Setting
：
0~200
Default
：
30
Description: To conver RPM from frequency, divide RPM by frequency
(1800rpm/60HZ=30), 30 is the ratio for this setting.