Moni FB-6677 Instruction Manual Download

Page: 16 / 20

10. Use only the rechargeable battery and charged provided by the manufacturer.
11. Do not use the battery or charger for other product, because this may lead to overheating, fire or explosion.
12.

DO NOT OPEN

the battery or charger.

13.

DO NOT CHARGE

the battery backwards.

14. Always keep the battery dry. The battery or its components must not get in contact with fresh or salt water.

ASSEMBLY STEPS

•

WARNING!

Adult assembly required.

•Children can be harmed by small parts, sharp edges and sharp points in the vehicle’s unassembled state. Care
should be taken in unpacking and assembly of the vehicle. Do not allow the children to play with any of the parts
or to help in the assembly of the vehicle.
• Identify all parts before assembly and save all packing material until assembly is complete to ensure that no
parts are discarded
• After each step you must check if each part is correctly placed and well fixed. Follow strictly each step and
study well the assembly figures.
• Assembly tools needed: screwdriver (not included in the set) and spanner (plastic – including in the package).
•

DO NOT

over-tighten in order to avoid any damage.

1.Step 1 - Fixing of the front axle – See Figures 2, 3 and 4:

Turn the ATV body upside down. On the front

part of the body, where the front axle is attached, 4 screws should be positioned. Unscrew them and take them
out. Place the frame with the front axle and the metal support for the front fork. Fix it using the 4 screws.

2.Step 2: Attaching the front wheels – See Figures 5, 6, 7, 8 and 9:

Remove the nut and 1 gasket from the

front axle. Attach the wheel. After that put the gasket and the nut, which you initially take off. fix the nut using the
plastic spanner. Finally, put the wheel hub. Fix the other wheel.

3.Step 3: Attaching the rear wheels – See Figures 10, 11, 12, 13 and 14:

Remove from each side of the rear

axle one gasket. Slide the axle through the openings at the rear part of the body (Fig. 11). Attach the wheel on
the axel so that the gear wheel must be fixed to the white gear of the gearbox. Attach the gasket and the nut. Fix
the wheel by tightening the nut with the plastic spanner. Finally, put the wheel hub. Fix the other wheel.

4.Step 4: Connecting the cables with battery terminals – See Figure 15:

Connect the red cable’s plug – in to

the red terminal of the battery. Take care to connect the cables correctly.

Never

attach red cables to the black

terminal or black cables to the black terminal.

5.Step 5: Fixing the seat – See Figures 16 and 17:

Attach the seat to the ATV body. Fix it using a screw and

screwdriver.

6.Step 6: Fixing the handlebar – See Figures 18, 19 and 20:

Remove the screw from the steering fork. Put

the handlebar on the top of the steering fork and align the openings for the fixing nut. Slide the nut through the
holes and fix it with a screw and screwdriver.

HOW TO OPERATE THE BO ATV

WARNING! IMPORTANT!

Always stop vehicle when changing the speed or direction to avoid damage the gears and motor.

PARTS OF THE PRODUCT

Before starting to assemble the ATV, take out all of te parts from the packing. Check if all parts, described in 1b are present.
Keep the package until you finish assembling.
On figures 1a and 1b are shown the parts of the ATV. On the table sheet of figure 1b is listed the quantity of each part.

Figure 1a: H –

handlebar;

– ATV body;

– seat;

– front wheels;

– rear wheels;

Figure 1b: B

– car body;

H –

steering wheel;

F –

front axle;

– seat;

– wheels;

– wheel hubs;

–remote control;

– charger;

Press the power button. Melodies will sound.
•To move the ATV forward: the Forward/ Rearward switch must be put in position Forward and press the foot pedal. If the
pedal is released, then the ATV stops moving.
•To move the ATV rearward: the Forward/ Rearward switch must be put in position Rearward (Backward) and press the foot
pedal. If the pedal is released, then the ATV stops moving.
•Put the Forward/ Rearward switch in position Stop in order to stop the ATV from moving.
•Using the steering wheel you can control the right/ left turning.