4
ARMING
Exit the vehicle and ensure all doors, bonnet & boot are closed.
Press the lock button on your vehicles remote control or the ‘lock’ method if by touch.
The siren will chirp once and the lights will flash once to indicate that the system is fully armed.
The alarm’s dash board warning light (LED) will slow flash to indicate the system is armed.
DISARMING
Press the unlock button on your vehicles remote control or the ‘unlock’ method if by touch.
(The siren will chirp twice and the vehicle lights will flash twice.)
If a door is not opened within 30 seconds, the system will automatically
re-arm (& re-lock
if the vehicle itself has this function or this system has been installed for this function).
If the alarm was activated whilst you were away, the siren will chirp 4 times and the lights
will flash 3 times as a warning. The dashboard LED will flash a code indicating what
circuit activated the alarm.
Note: If you have triggered the alarm by opening the car door with the ignition key you may have to close
all doors and then lock & unlock the vehicle with the cars remote to turn the alarm off as some factory
remotes do not operate with a door open.
AUTOMATIC SECURITY RE-ARM
Many factory systems will re-lock the doors if they are not opened within a certain time of unlocking
by remote control. When the doors re-lock, this security system will re-arm at the same time.
If your vehicle does not automatically re-lock the doors, this security system will still automatically
re-arm after 30 seconds if a door has not been opened. This feature may not necessarily operate if
your vehicle turns on the interior dome light upon unlocking.
The security system has the ability to re-lock the doors if your vehicle does not have this function.
Discuss this option with your security system installer.
