SR5i Technical Manual
TSP095.doc Issue 1.0 – July 2004
©
Money Controls 2004. All rights reserved.
25. Mechanical Specification
25.1 Position
The SR5i should be mounted /-2 degrees of the vertical in any plane. It is intended
for use in stationary environments.
25.2 Coin/Token Sizes
The accepted range of coin sizes are shown below:
This Graph is only intended as a guide. If a coin is required that is close to the limits shown,
please check with Money Controls Technical Services department first.
Figure 23: SR5i Accepted Coin Dimensions Graph
