Monet Broadband PC5220 User Manual Download Page 28

 

 

 
 
 
 
 
 
 
 

 
If you have purchased this product under a United States Government contract, it shall be 
subject to restrictions as forth in subparagraph (C)(1)(ii) of Defense Federal Acquisitions 
Regulations (DFARs) Section 252.227-7013 for Department of Defense contracts, and as 
set forth in Federal Acquisitions Regulations (FARs) Section 52.227-19 for civilian agency 
contracts or any successor regulations. If further government regulations apply, it is your 
responsibility to ensure compliance with such regulations. 
 
 
B. Safety Information 

This section outlines important liability and safety guidelines concerning your new PC Card. 
 

1.

 

Important Notice 

Because of the nature of wireless communications, transmission and reception of data can never 
be guaranteed. Data may be delayed, corrupted (i.e., have errors) or totally be lost. Although 
significant delays or losses of data are rare when wireless devices such as the PC Card-Model 
PC5220 CDMA modem are used in a normal manner with a well constructed network, they 
should not be used in situations where failure to transmit or receive data could result in damage 
of any kind to the user or another party, including but not limited to personal injury, death or loss 
of personal property. No responsibility for damages of any kind resulting from delays or errors in 
data transmitted or received using the PC Card-Model PC5220 CDMA modem, or for failure of 
the PC Card-Model PC5220 to transmit or receive such data. 

 
2. Safety and Hazards 

 

 

Blasting Areas and Hospitals 

Do not operate the PC Card-Model PC5220 in areas where blasting is in progress, where 
explosive atmospheres may be present, near medical equipment, life support equipment, or any 
equipment which may be susceptible to any form of radio interference.  In such areas the PC 
Card-Model PC5220 

MUST BE POWERED OFF

. It can transmit signals that could interfere with 

this equipment. 

 
Aircraft 

Do not operate the PC Card- Model PC5220 in any aircraft whether the aircraft is on the ground 
or in flight. In aircraft, the PC Card- Model PC5220 

MUST BE POWERED OFF

. When operating 

it can transmit signals that could interfere with various onboard systems. 
 

Driving 

The driver or operator of any vehicle should not operate the PC Card- Model PC5220 while in 
control of a vehicle. Doing so will detract from the driver or operator’s control and operation of that 
vehicle. In some jurisdictions, operating such communications devices while in control of a 
vehicle is an offense. 

WARNING: 

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital 

apparatus as set out in the interference causing equipment standard entitled “Digital Apparatus,” ICES-003 
of the Department of Communications. 
 

Cet appareil numerique respecte les limites de bruits radioelectriques applicables aux appareils numeriques 
de Classe B prescrites dans la norme sur le materiel brouilleur. “Appareils Numeriques,” NMB-003 edictee 
par le ministre de Communications. 

25 

Summary of Contents for PC5220
































Reviews: