32D1999
13
LOG PLACEMENT
DUZY II (VDY24/18, 30)D2 LOG INSTALLATION SEQUENCE:
1. Install the rear log (#1) on the two locating pins. Visually check to
verify the log is securely placed on the pins and in contact with the
grate.
See Figure 11.
2. Install the right log (#2) on top of the control cover. Slide the log
back until touching the rear log (#1). Visually check to verify the log
is resting on the grate and control cover.
See Figure 11.
3. Install the left log (#3) with its bottom groove resting on the right
side of the grate bar. Slide the log back until touching the rear log
(#1). Visually check to verify the log is resting on the grate.
See
Figure 11.
4. Install the top right log (#4) with the base sitting on the rear log (#1)
and the top sitting on log (#4). Visually check to verify the log is
resting on the rear log (#1) and left log (#3).
See Figure 11.
Figure 11 - VDY24/18D2, 30
Log Placement
4
1
3
4
DUZY 3R (VDY24/18D3R, VDY30D3R) LOG INSTALLATION
SEQUENCE:
1. Line up pins on bottom of Rear Log #1 with pins on grate bar and
place on grate.
See Figure 13.
2. Place Front Left Log #2 on left front of grate bar lining up cutout in
bottom of log with grate bar.
See Figure 12.
3. Place Front Right Log #3 on right front of grate bar lining up cutout
in bottom of log with grate bar. Make sure Log #3 touches Log #1.
See Figure 12
.
4. Place back end Top Middle Log #4 on Log #1. Press the side of Log
#4 up against raised area of Log #1. Line up notch in front end of
#4 with grate bar.
See Figure 12.
5. Rest Top Right Log #5 on Log #3.
See Figure 12.
6. Line up Top Left Log #6 with notches on Log #2 and Log #4.
See
Figure 12.
Figure 12 -
VDY24/18D3R,
VDY30D3R
Log Placement
#1
#2
#5
#4
#6
#3
Cutout
for
Grate
Bar
Cutout
for
Grate
Bar
Notch
Notch
Pins
