8
32D1999
PLACING AND SECURING APPLIANCE
Figure 4 - Securing Heater to Floor of Fireplace/Firebox
Left Side
Mounting
Hole
INSTALLATION
ASSEMBLY PROCEDURE
1. Center the gas log unit in the fireplace or firebox. Make certain the front feet of the grate sit inside the front edge of the
fireplace or firebox.
2.
Refer to Figure 4
for hole locations. After centering the grate correctly, mark the hole positions on the fireplace/firebox
floor. Drill two (2)
5
/
32
" diameter holes approximately 1
1
/
2
" deep.
3. Anchor the grate to the fireplace/firebox floor using the screws provided.
Refer to Figure 4.
Proper installation of the grate is essential to prevent any movement of the gas logs and controls
during operation.
Right Side Mounting Hole
You must secure the gas log heater to
the fireplace floor. Properly securing
the grate prevents movement of
the entire unit when you adjust the
controls. Grate movement could cause
a gas leak.
W
ARNING