32
Monessen • AVFL Series Installation Manual • 4099-901 Rev. E • 01/22
The positioning of the logs is critical to the safe
and clean operation of this heater. Sooting and
other problems may result if the logs are not
!!>!
Never add additional logs or embellishments
such as pine cones, vermiculite or rock wool to
the heater. Only use the logs supplied with the
optional log kit (CDLS).
Failure to position the parts in accordance with
&!`! !!
approved for this heater may result in property
damage or personal injury.
Figure 7.5– Log Pin Placement for AVFL42N(P)IP-BU, AVFL42N(P)IP-RB, AVFL48N(P)IP, AVFLST48N(P)IP, ODLANAIG-48 AND ODLANAIGST-48
WARNING
$$)! !!` ! -
pletely before beginning installation. DO NOT use this
kit with any other internal hearth option such as stones.
Kit Contents:
• Three (3) driftwood logs
x *$ #)% Q
x *$ #)% Q
NOTE:
<
Always
wear gloves to prevent skin irritation from log material.
After handling the logs, wash your hands with soap and
&
NOTE
(
Q !
glass media should only be installed after the pin brackets
!
!
then be placed in the unit after the glass media and air
"& -
& &
move the glass media away from the pin location holes
$
AVFL42N(P)IP-BU, AVFL42N(P)IP-RB, AVFL48N(P)IP,
and AVFLST48N(P)IP
O > & Q -
ing holes and screws provided in locations indicated
& & G
of the pin bracket will be used to secure the pin to the
& !
=$
Log Pin Locations
E. Placement of Optional Logs
