Moneris V400c, Installation Instructions Manual

Page: 9 / 10

9
Here’s a few more topics for you to be aware of.
Payment Terminal Default Settings
The V400c will include the following default settings to safeguard against fraudulent activity. These
are default settings on the payment terminals and must be in place. No retailer action needed here.
1. PIN and Tap only. Payment terminal(s) are configured to only accept PIN and
Contactless (tap) transactions.
2. Manual (Card) Entry is Disabled. Protects against transactions facilitated by the manual
entry of card data.
Familiarize Yourself with the V400c
This section connects you to Moneris Support webpages to help you learn about the V400c.
PERFORMING TRANSACTIONS
Familiarize yourself with using the terminal (https://www.moneris.com/help/V400C-WH-
EN/UYT/Using_the_terminal.htm) and the transactions (including how to process a refund)
(https://www.moneris.com/help/V400C-WH-EN/Transactions/Menu_transactions.htm) you can
perform.
RUNNING REPORTS AND CLOSING YOUR BATCH
View and print reports (https://www.moneris.com/help/V400C-WH-EN/Reports/Reports.htm) on your
terminal including batch close reports which are part of the end of day procedure.
PCI Compliance – RSG Payment Card Terminal
Procedures
The RSG Payment Card Terminal Procedures you recently learned remain the same for the V400c
payment terminal, so continue to Lock It, Restrict It, Inspect It and Report It.
Update any references to the old serial number with the serial number of the new terminal. Ie.
V1234567.