4
4 Steps to Get Payment Ready
Step 1 - Remove Existing iCT250 Payment Terminal,
Magic Box & Power Cable
1.
Disconnect the Ethernet cable, power cable and phone line (if applicable) from the existing
Magic Box.
2.
Set the Magic Box and payment terminal aside.
3.
The existing Ethernet cable will remain in place and will connect to the new multi-port box;
no action to be taken with the Ethernet cable.
4.
The power cable must be replaced. Follow the power cable from the Magic Box down into the
cupboard and unplug it from the outlet.
5.
Make note of the outlet as you will be plugging the new power cable into the same outlet.
6.
Pull the other end of the power cable down to remove it and set it aside with the Magic Box
and payment terminal.
7.
After the new equipment is installed and confirmed working, return the old Magic Box,
payment terminal and power cable to Moneris by following the instructions in Appendix
‘Return Old iCT250 to Moneris’ section below.
8.
Discard the old Admin Card after new terminal is installed and confirmed working.