6
Step 3 - Load Paper Roll into the Payment Terminal
Paper rolls used in the iCT250 are compatible with the new V400c.
1.
Lift up printer latch and pull back.
This will open the lid and expose the paper well.
2.
Insert paper roll into paper well.
The loose end should unroll toward the back of
the terminal. If it does not, printouts may be blank.
Extend the paper at least one inch (2.5 cm)
over the top of the lid.
3.
Close lid and press down.
This will snap the lid in place so the extended paper is secure.
The paper should unroll over top of lid, not over the screen.