Moneris Go®: Setting up Your Terminal
10
Wireless Communication: 4G and Wi-Fi
The terminal uses long-range cellular communication (4G or 3G) to send and receive information to and from
the Moneris host. The terminal communicates via 4G by default for faster communication, and uses 3G as a
fallback where 4G is not available.
If you set up a Wi-Fi network, the terminal will switch to Wi-Fi when the Wi-Fi signal is stronger. To setup a Wi-Fi
network:
1.
Swipe down from the top of the screen.
You may have to swipe down again to see the full panel.
2.
Tap
Wi-Fi
.
The terminal displays a list of the available Wi-Fi networks.
3.
Tap the network to which you want to connect
The password screen appears.
4.
Enter the Wi-Fi password and tap
Connect
.
